Interface Rowe AMI Electronic Coinvalidator

With this interface PCB you can replace simply to the mechanical coin validator in its Rowe Ami CD 100 juke box by an electronic coin validator.

Function of the PCB:
1) supply of the PCB`s over plug P1, which is available in most devices. measure (otherwise GND and + 28 V at the power supply or at the wiring harness!
Option: Foreign supply via strip P4 over a plug power supply unit (12V), Art.No: 9930400049, are found if no suitable supply at the juke box, and/or
the wiring harness of the juke box completely unchanged to remain is.
IMPORTANTLY: Both supplying possibilities (P1 and P4) are polarity safe, i.e.: In the case of wrong allocation the PCB is not damaged or is not destroyed!
2) the electronic coin validator SECI RM4/ RM5 or pin-compatible devices is attached with that 10 poligen flat cables at the plug P2.
3) the plug P3 connected with original connector of the ROWE AMI CD100, which was attached to the mechanical coin switch (only with mechanical coin validator)
4) at the juke box is now the coin adjustment to only examine